ok sorry im sure this question is posted everywhere but i finally got enough money for a swap i need to know, what exactly ill be needing though, i have a 94 celica GT, 5s-fe engine, its manual, ok i heard going for a front clip is the best thing to go with, but what generation should i get, i kno it should be 3S-GTE (st205) right? what should my front clip come with? would i need to buy extra parts? if theres any info i should kno about this swap let me kno please. thanks

Stranger

go to www.jarcoinc.com


get either an st185 (5th gen celica all trac) or st205 (6th gen celica all trac). the st185 will be better for you because it sounds like that you dont have much knowledge (no offense) in this. plus some people say that the parts are easier to find. which i dont get because they are the same engine. but anyhow. you will need someone to do the wiring harness for the car. because you are going from a usdm lhd car to a jdm rhd engine. if you know what i mean. plus this is not needed but i would suggest doing it. replace all the fuel lines, hoses, spark plugs, plug wires, etc. if you get the clip most everything that you need will be on it.

QUOTE

which i dont get because they are the same engine. but anyhow.

There is actually alot of things different about the 2nd and 3rd gen of the 3sgte. the 1st thing that comes to mind is T-VIS... quite a difference.

The 2nd is the air to air and water to air intercooler.

3rd different turbos..
st185 - ct26
st205 - ct20b

3rd different throttlebody and injector size

4th completly different head design

5th 30+ hp difference between the 2 motors

so again there is really nothing different about the blocks the right?

just everything that goes onto it like i said before.

yeah i dont really have much knowledge in this. so i would have to get a new wiring harness? wouldnt that come with a front clip? front clips that i see have a 4WD transmission, would it cost extra money to do this? if it does how much do you think it will be? or should i just stay with my transmission for now and do that later? i dunno depends on the money i guess. and what do you think would be a good price for a front clip? and thanks for the info guys

oh yeah sorry i really dont kno much i see alot of front clips saying they're from a MR2 and others that are from a GT-4 wich should i go for? or will both fit and run the same. thanks again

--GT2GT4+Apr 27, 2003 - 10:37 PM

QUOTE (GT2GT4 @ Apr 27, 2003 - 10:37 PM)

go to www.jarcoinc.com get either an st185 (5th gen celica all trac) or st205 (6th gen celica all trac). the st185 will be better for you because it sounds like that you dont have much knowledge (no offense) in this. plus some people say that the parts are easier to find. which i dont get because they are the same engine. but anyhow. you will need someone to do the wiring harness for the car. because you are going from a usdm lhd car to a jdm rhd engine. if you know what i mean. plus this is not needed but i would suggest doing it. replace all the fuel lines, hoses, spark plugs, plug wires, etc. if you get the clip most everything that you need will be on it.

No offense Gt2Gt4 I really like your car as far as exterior looks But please take those mud guards off. To tell you honestly, everytime I show your car to my friends they always notice thesame thing(MUD GUARDS) they say your car has nice exterior set up but the Mud guards. Probably you're trying to make a point that you're going to use your car for RALLY. Not many rally cars use mud guards now a days. Im telling you this in a good way, I dont want the pic of your car to end up on Riceboyz galleryat R-Toyz.com. >>

umm yea

its not my car

just a picture of some gt4 that was posted on here by another member.

its ok .,... i dont like the guards either

--StrangerDanger+Apr 28, 2003 - 11:58 AM

QUOTE (StrangerDanger @ Apr 28, 2003 - 11:58 AM)

yeah i dont really have much knowledge in this. so i would have to get a new wiring harness? wouldnt that come with a front clip? front clips that i see have a 4WD transmission, would it cost extra money to do this? if it does how much do you think it will be? or should i just stay with my transmission for now and do that later? i dunno depends on the money i guess. and what do you think would be a good price for a front clip? and thanks for the info guys

I dont want to be a jerk about this but DO YOUR HOMEWORK. The very first thing you gotta have is determination. If you got that great - now u gotta do homework. This isnt an overnight - look stuff up thing. I started researching the swap in January, and im now doing it. All the questions you have are out there for you to find. Search this forum for questions because theres alot there. Visit MR2 forums - because the MR2 uses the 5sfe and the 3sgte.
Where do you live? If your in Cali - its oging to be tough swapping cuz theyr'e asses out there. Are you going JSpec or USspec? 3rd Gen 3s is going to cost you big time - and its rare. If your doing 3rd gen then just get a clip. 2nd gen is cheaper, more readily available, has alot of potential, has parts in the US, is a direct replacement for the 5s. You cant use a 4wd tranny, u can use a GT tranny as long as u take it real easy, u can use a V6 Camry, or MR2 turbo tranny. The wiring harness depensd on the engine - if u get a front clip you'll have the complete harness, if its USDM then ur good to go, if its JSpec u gotta extend it. U gotta wire the ECU because the 5sfe wont work, that means getting wiring diagrams. I can go on and on - just do alot of research. Do it to your blue in the face, cuz if u dont kno what ur doing mid swap - ur screwed.

--GT2GT4+Apr 28, 2003 - 6:00 AM

QUOTE (GT2GT4 @ Apr 28, 2003 - 6:00 AM)

so again there is really nothing different about the blocks the right? just everything that goes onto it like i said before.

the blocks are the same, but... you can't get any of the 3rd gen 3sgte parts through a US dealer. you have to order them direct from japan or the UK. so that could mean a month or so downtime for a new belt if one breaks.

what are really the parts that are different?

why cant i use 5th gen belts and stuff?

i am just curious not argueing.

Here are a couple of sites for your homework.
www.geocities.com/zegoat2000/homepage.html
www.topshelfracing.com/project

look those over a bunch of times then come back with questions
zegoat@hotmail.com

THis is on that link @ topshelfracing.com:

My Car at a Glance
Year: 1995
Model: Celica ST
Engine: JDM 3SGTE
0-60 6.50 seconds
1/4 unknown

Greddy Exhaust +25 hp
Denso Plugs +10 hp
Cold Air Intake +20 hp
Magecore Wires +10 hp
Approx Overall HP 250 hp

Um...does that seem WAY OFF?!?! to anybody?
First - JDM 3sgte 2nd gen is 225hp. So by adding a 25hp exhaust (WTF) ur already at 250? Not to mention the 20hp CAI? 10HP for plugs? According to this it would be a 290hp car.

Am I in lala land?

hahaahahhaa

thats funny. maybe he has the 1st gen (4th gen) 3s-gte.

if he has the 2nd well...yea i think you know.

even if he did have the 1st gen - 25hp from exhaust? 20 from a CAI? Ur lucky to get 10 outta a CAI!

Says its out of an ST185 (2nd Gen)

This post has been edited by Supersprynt: Apr 30, 2003 - 9:15 AM