Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #26475

5SFE and 3SGTE flywheels - 6G Celicas Forums

Topic #26475 67 posts Started by WannabeGT4
WannabeGT4
#61
I've been busy lately but this is what I'm going to give to the person that does the machine work.
Measurements in white are what I got from the 5S flexplate. Measurements in red are what the flexplate needs to be in order to bolt up to the 3SGTE. I started to put the measurements in from what I assumed to be a 5S flywhwheel but that made things really messy looking. I'll make a seperate drawing for that.
IPB Image
Project ST204.5 99.88946% complete...
celicast3sgte
#62
very good progress so far man! im interested in how this turns out. your going to get vids of it running right? wink.gif
94' ST Coupe - 5sfe Motor swap and brake swap.
WannabeGT4
#63
Absolutely.
Project ST204.5 99.88946% complete...
2slow2nervous
#64
so questions if im using the 5sfe tranny for the 3sgte swap i use th 3sgte flyweel and plates and 5sfe disc correct?
WannabeGT4
#65
Yeah, you'll need the 3S flywheel and pressure plate and either a 5S disk or a custom 3S disk with splines to match the S54 transmission.

I forgot to upload the 5SFE Flywheel measurements but here they are now. If someone can measure theirs to compare that'd be great.
IPB Image

This post has been edited by WannabeGT4: Oct 19, 2006 - 7:21 AM
Project ST204.5 99.88946% complete...
spunky393
#66
>
QUOTE(celicast3sgte @ Jul 29, 2005 - 4:29 PM) [snapback]318241[/snapback]
>
im embarrased to read this topic........



Couldn't have said it better myself, that's why i'm a ghost on this forum anymore
The most important lesson I learned from Karate-Dô Kyôshan–“You can not be what you do not believe you are”
_mikeE
#67
okay quick question, because i've been considering doing the st205 motor swap..and i've been acknowledged that in order to use the 5s tranny with the 3s motor, you need the 3s pressure plate and flywheel....well i've got an aftermarket clutch kit (disc, pressure plate), do i still have to switch to the 3s pressure plate?

just realized that the last post was a freakin year ago--oh jeebus.
← Back to Topics

Page 3 of 3 (67 total posts)