Wiring something to my exhaust - 6G Celicas Forums

Mike

#1

I was wondering if anyone could give me some advice as to the best place to drill a hole to get a wire from my exhaust cutout which is right behind my header, up though the car and to my center console >

>

i'm scared to go through fireproofing material and whatnot.. >

>

mark_426

#2

What exactly are you trying to do?

If anyone needs interior stuff, etc, I'm parting whats left of my celi out. Just ask.

Mike

#3

I have an electronic exhaust cutout system and the switch for it needs to be wired up throught the bottom of the car and to the center console so i can turn it on and off from inside the car

Hanyo

#4

i would run the wire up into the engine bay and through a hole in the fire wall.

or maybe through the rubber boot the engine harness uses..

try to keep the hole far away from the cut out so the exhaust fumes have a harder time to get into the cab.

Mike

#5

-Hanyo+May 20, 2005 - 11:29 PM

QUOTE(Hanyo @ May 20, 2005 - 11:29 PM)

i would run the wire up into the engine bay and through a hole in the fire wall.

or maybe through the rubber boot the engine harness uses..

try to keep the hole far away from the cut out so the exhaust fumes have a harder time to get into the cab.
[right][snapback]289871[/snapback][/right]

good idea
i'll try and wire it up through the enginebay and thru the firewall

Wiring something to my exhaust - 6G Celicas Forums

Contact 6GC Archives