I have a 94 GT, and I was wondering if 99 OEm side skirts would work with it?
will the 99 OEM side skirts work? - 6G Celicas Forums
Yes they will.
yes they will. all side skirts and front bumpers from 94-99 will work. Its the rear that is different for coups and hatchs
so i can go to toyota and have them get the side skirts, right?
i just put them on my 94 gt...check my profile. i ordered them right from toyota. make sure you get all the parts (fasteners, washers, molding)
here's the product numbers for everything;
(1) 76911-20900 Mudguard, Side R (This is the skirt itself)
(1) 76912-20900 Mudguard, Side L (This is the skirt itself)
(2) 76925-20020 Protector, Side M (Rubber seal) Make sure you tell them what color. There's a color code they specify when you order it.
(1) 76927-20040 Protector, Side M (Goes between the inside of the skirt and the sheetmetal)
(1) 76928-20040 Protector, Side M (Same as above discription only it's a smaller piece)
These are the fasteners:
(4) 90159-60414 Screw, W/ washer
(8) 90159-60420 Screw, W/ washer
(4) 90189-06006 Grommet, Screw
(8) 90189-06154 Grommet, Screw
(16)90467-09185 Clip
(18)90467-10162 Clip
This post has been edited by Jdog1385: Apr 3, 2005 - 10:22 PM
here's the product numbers for everything;
(1) 76911-20900 Mudguard, Side R (This is the skirt itself)
(1) 76912-20900 Mudguard, Side L (This is the skirt itself)
(2) 76925-20020 Protector, Side M (Rubber seal) Make sure you tell them what color. There's a color code they specify when you order it.
(1) 76927-20040 Protector, Side M (Goes between the inside of the skirt and the sheetmetal)
(1) 76928-20040 Protector, Side M (Same as above discription only it's a smaller piece)
These are the fasteners:
(4) 90159-60414 Screw, W/ washer
(8) 90159-60420 Screw, W/ washer
(4) 90189-06006 Grommet, Screw
(8) 90189-06154 Grommet, Screw
(16)90467-09185 Clip
(18)90467-10162 Clip
This post has been edited by Jdog1385: Apr 3, 2005 - 10:22 PM
thanks everyone, i really appreciate the replys. JDog...just curious, how much did it all cost?
if ur gonna get em from the dealer, expect to pay a lot. im not sure but I THINK they're like 400 dollars for both or something along that line
Note to new members. Discussions such as the ones below are forbidden.http://www.6gc.net/forums/index.php?showtopic=26310&hl=
hey, anything for the 6Gen >
>
yeah, try to find a used pair. preferably from Sh0gunkid8721, thats where I got mine >
>
-Sh0gunkid8721+Apr 3, 2005 - 11:39 PM
-Sh0gunkid8721+Apr 3, 2005 - 11:39 PM
QUOTE(Sh0gunkid8721 @ Apr 3, 2005 - 11:39 PM)
if ur gonna get em from the dealer, expect to pay a lot. im not sure but I THINK they're like 400 dollars for both or something along that line
[right][snapback]266091[/snapback][/right]
[right][snapback]266091[/snapback][/right]
QUOTE
thanks everyone, i really appreciate the replys. JDog...just curious, how much did it all cost?
i spent like 450 on them...pretty expensive. i tried using a used set but they were useless, clips were broken and it would of looked bad.
you should try calling Burien Toyota...their website is listed in the link page. they told me i could get the skirts for around 300.
This post has been edited by Jdog1385: Apr 3, 2005 - 11:00 PM
thanks again. Toyota here I come!! >
>
holy **** thats bad ass jdog.. will the oem sides fit a convertible? i thought i had those, but mine are black and plain looking.. are they different ones from toyota?
-2003cbgts+Apr 4, 2005 - 5:58 PM
I saw the guy on ebay who had the ferrari grey paint on his convertible with them on. verts are different then the coupes at the bottom. They have a long bar welded in instead of the coupes bodywork which curves to the bottom
QUOTE(2003cbgts @ Apr 4, 2005 - 5:58 PM)
holy **** thats bad ass jdog.. will the oem sides fit a convertible? i thought i had those, but mine are black and plain looking.. are they different ones from toyota?
[right][snapback]266379[/snapback][/right]
[right][snapback]266379[/snapback][/right]
I saw the guy on ebay who had the ferrari grey paint on his convertible with them on. verts are different then the coupes at the bottom. They have a long bar welded in instead of the coupes bodywork which curves to the bottom
^^ so the oem skirts won't fit a convertible?
lissa | 1997 Celica Convertible*My other ride is your boyfriend* ;)