Whats up guys and girls? I'm new here and i need some help. I need to know if anyone can find a definate place to order clear bumper markers and clear side markers for the GT. I am stumped. I also have a general question, what do you all think are better? Shaving the side markers or making them clear with hyperwhite bulbs? Thanks all.
Clear Bumper and side lens' - 6G Celicas Forums
you can buy from me >
>
>
procarparts.com is the only place ur going to find them.
Modification needed if u have a 94 or 95.
Modification needed if u have a 94 or 95.
MyFlickrMyeBay_Perpetual Aperture_
coustoe are your turns for 94-95?
how nice are they, are they homemade??
how nice are they, are they homemade??
--coustoe+Apr 7, 2003 - 8:58 AM
What do you have man? give me some details and ill consider it, i have a 94 gt hatchback with out factory fogs.
| QUOTE (coustoe @ Apr 7, 2003 - 8:58 AM) |
| you can buy from me >> |
What do you have man? give me some details and ill consider it, i have a 94 gt hatchback with out factory fogs.
I'm selling the same ones as procarparts for $15 in the buy/selling forum, What happened was I bout them from procarparts and realized afterwards they wouldnt fit in my new combat front bumper. Bought them for like $30 but ill sell them for $15
what kind of modification would be needed to adapt these to the 94/95?
[img]http://photos-081.facebook.com/n6/081/n15913038_30266081_3342.jpg[/img]
Ill just ask the same question...
What kind of modification would be needed to adapt these to the 94/95? >
>
What kind of modification would be needed to adapt these to the 94/95? >
>
I'm pretty sure that very extensive modifications would be required to get the '96 and up clear corners to fit a '94 or '95. I've never seen it done, and I think that it's easier to simply make your own clear corners out of the stock ones. There's a how-to on this site that details how to do it. >>
>
New Toyota project coming soon...
Well i have a 94, and i put on a front kit (Vis Invader). All that i did was use a grinder to grind off the extra part that doesnt exist on the 94/95's. You'll see when you compare the too. After that they should fit. I'll take pics and post them.
MyFlickrMyeBay_Perpetual Aperture_
Yeah,
the 96 turns wont fit the factory bumper without some major cutting. You can make your own clears. What I did with my 94 was take the factory signal out, and fabricate a small turn signal/opening kinda like what they sell for the miatas(have a pic if it helps to explain it). For my side markers(since they werent making clears in 98), I used the clear rear bumper sidemarkers from a 92-96 prelude/94-97 accord(I believe it was those year accords). I had to trim the mounting point just a tiny bit, but it fit fine, and even used the factory gasket(you can see pics of those on the celica.net website as well).
let us know what you decide
matt
the 96 turns wont fit the factory bumper without some major cutting. You can make your own clears. What I did with my 94 was take the factory signal out, and fabricate a small turn signal/opening kinda like what they sell for the miatas(have a pic if it helps to explain it). For my side markers(since they werent making clears in 98), I used the clear rear bumper sidemarkers from a 92-96 prelude/94-97 accord(I believe it was those year accords). I had to trim the mounting point just a tiny bit, but it fit fine, and even used the factory gasket(you can see pics of those on the celica.net website as well).
let us know what you decide
matt