lil_lissa

#31

so just to clarify, there isn't a set of clear turn signals you can just purchase without doing your own? i'm not very talented at making my own **** lke that, as a matter of fact have never done that, so i woudln't want to try it. If i just change the bulb in there from orange to a clear bulb, will it change it? because when i look at the turn signal, the plastic is clear, but the bulb is orange... does that make sense??

i just want it to flash clear rather than flashing orange

---

lissa | 1997 Celica Convertible*My other ride is your boyfriend* ;)

ghostdog

#32

you can buy 96-99 clear signals from procarparts or on ebay. or if you just want them clear (tho it doesn't look as good as the ones you buy) you can remove the amber lense inside



-lil_lissa+Apr 2, 2005 - 2:08 PM

QUOTE(lil_lissa @ Apr 2, 2005 - 2:08 PM)

so just to clarify, there isn't a set of clear turn signals you can just purchase without doing your own? i'm not very talented at making my own **** lke that, as a matter of fact have never done that, so i woudln't want to try it.  If i just change the bulb in there from orange to a clear bulb, will it change it? because when i look at the turn signal, the plastic is clear, but the bulb is orange... does that make sense??

i just want it to flash clear rather than flashing orange
[right][snapback]265653[/snapback][/right]

lil_lissa

#33

thanks, is there a website? www.procarparts.com or something? ive been keeping my eye out for ones on ebay but haven't seen anything yet. How do you get into the headlight to get the lens out? is it harD?

---

lissa | 1997 Celica Convertible*My other ride is your boyfriend* ;)

Blakout16

#34

it requires a heat gun (or blow dryer) and patients

---

the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.

ghostdog

#35

assuming you meant turn signal rather than headlight heres a how-to

http://www.6gc.net/index.php?action=howto&itu=12

-lil_lissa+Apr 2, 2005 - 2:32 PM

QUOTE(lil_lissa @ Apr 2, 2005 - 2:32 PM)

thanks, is there a website? www.procarparts.com or something? ive been keeping my eye out for ones on ebay but haven't seen anything yet.  How do you get into the headlight to get the lens out? is it harD?
[right][snapback]265658[/snapback][/right]

TRD6GC

#36

BUMP-----


I just got my 90-93 clear turn signals in the mail. I havent modified them in yet, but i just set them in place to see what they look like and there a little small. So fill the gaps with anything? Or just push them in more so that there is no gap just a little space. ????????????????HELP??????????

AndyST4

#37

so i've heard that 96+ turns can easily be fitted into a 94 bumper, is this not true?

chosen1

#38

-AndyST4+Apr 4, 2005 - 6:23 PM

QUOTE(AndyST4 @ Apr 4, 2005 - 6:23 PM)

so i've heard that 96+ turns can easily be fitted into a 94 bumper, is this not true?
[right][snapback]266498[/snapback][/right]

I've heard ppl on here say the same thing. They said they just made a hole in the turn signal to fit the one in the 94 bumper. Maybe they were wrong? >>

lil_lissa

#39

i found a pair on procarparts.com
anyone have these ones installed in their cars? just curious as to how it looks

---

lissa | 1997 Celica Convertible*My other ride is your boyfriend* ;)

TrD3sgte94

#40

-lil_lissa+Apr 4, 2005 - 6:29 PM

QUOTE(lil_lissa @ Apr 4, 2005 - 6:29 PM)

i found a pair on procarparts.com
anyone have these ones installed in their cars? just curious as to how it looks


[right][snapback]266525[/snapback][/right]

i just bought a package of those and sidemarkers i will make them fit... if yall want me 2 post pics after its done just reply 2 this...

-wes-

---

[SIZE=7][COLOR=blue][SIZE=1]-WES-

BrianGT4

#41

I just got a pair of the gen5 clear turns so I'll try and get some pics up over the weekend.

---

arospeeds suck ass!!!

CeliNProgress

#42

Yo Latinomasfino, das HOT! My car is I think about tha same color! You gota tell me how you did those clearouts!!!

CeliNProgress

#43

Yo Latinomasfino, das HOT! My car is about the same color. You gota tel me how u did those clearouts???

BrianGT4

#44

anyone got a better guide on how to do this. I have both the stock 94 & the clear gen5 turns sitting in from of me. What exactly do I do? swap the lenses? or is it try and fit the gen5 inside the gen6 houseing?

help!!!!!!!!!!!!!!!!!!

---

arospeeds suck ass!!!

BrianGT4

#45

forget it. got it sorted.

---

arospeeds suck ass!!!

Jdog1385

#46

definitely need to see pics wes...and anybody else thats doing this. something i need to do

KaLeHaGeNeEs

#47

are there any pix yet ??

BrianGT4

#48

http://www.6gc.net/forums/index.php?showtopic=23492

---

arospeeds suck ass!!!

vangSTa_celica

#49

Jdog, why not just use the 5th gen ones? I think it'd make a dramatic difference on your car.

---

A Jaws4God Creation...

Rjb23

#50

-lil_lissa+Apr 4, 2005 - 11:29 PM

QUOTE(lil_lissa @ Apr 4, 2005 - 11:29 PM)

i found a pair on procarparts.com
anyone have these ones installed in their cars? just curious as to how it looks


[right][snapback]266525[/snapback][/right]

If you have a 94-95 it looks like crap, one they are to wide to fit in the slots, 2 they are angled not rounded so they don't fit right there. Stick with the 93 turns if you have a 94-95.

TrD3sgte94

#51

JUST PM ME IF U WANT PICS LATER,ITS EASIER 2 REMEMBER WHO WANTS THEM... IT WILL BE AT LEAST A WEEK OR SO B/C I SENT MONEY ORDER YESTERDAY...


-WES-

---

[SIZE=7][COLOR=blue][SIZE=1]-WES-

lil_lissa

#52

-Rjb23+Apr 12, 2005 - 12:37 PM

QUOTE(Rjb23 @ Apr 12, 2005 - 12:37 PM)

If you have a 94-95 it looks like crap, one they are to wide to fit in the slots, 2 they are angled not rounded so they don't fit right there. Stick with the 93 turns if you have a 94-95.
[right][snapback]270046[/snapback][/right]

good thing i have a 97 >>

---

lissa | 1997 Celica Convertible*My other ride is your boyfriend* ;)

TrD3sgte94

#53

[quote=lil_lissa,Apr 14, 2005 - 5:28 PM]
[quote=Rjb23,Apr 12, 2005 - 12:37 PM]

If you have a 94-95 it looks like crap, one they are to wide to fit in the slots, 2 they are angled not rounded so they don't fit right there. Stick with the 93 turns if you have a 94-95.
[right][snapback]270046[/snapback][/right]
[/quote

5th gen works the best b/c i got my 96-99 yesterday and the dont fit unless u cut bondo and re drill holes(CRAPY!!!) and sorry no pics

---

[SIZE=7][COLOR=blue][SIZE=1]-WES-

DeW_H0e_GT

#54

i've installed a 5th gen clear bumper lense and its crappy...it wouldnt be a real comfy fit....i've tried forcing the screww into the 6th gen bolt housing...cracked the lenses.....i've used epoxy on the bottom portion of the lense and its sticking ever since...looks weird cuz of the 2 plastic rods that were supposedly mounted on the 5th gen housing...... >>

Rjb23

#55

I have 5th gens and I screwed them in too. You have to redrill the hole to match the bumper. Check out my pics in my profile or in my thread.

Rjb23

#56

And you dont use the lense you use the whole housing.

initialdrift55

#57

i have a brand new pair of the 5th gen..to sell if anyone wants it i bought them then never used it because i got a kit so...for sale 40$

Jaws4God

#58

So should I get the 5th gen 90-93 clear turn signals or the 90-93 clear euro turns?

Clear Turns:


Clear Euro:


Does it really matter?

So the wiring is easy? Screwing them in is hard?

---

~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207

mark_426

#59

Preference.

Wiring, the bulbs plug right it.

Then, if you want to make a bracket to fit, go for it, if not, some velcro or the sort ought to also hold.

Heres what mine look like:
http://img78.echo.cx/img78/7743/p5270029opt8hl.jpg

---

If anyone needs interior stuff, etc, I'm parting whats left of my celi out. Just ask.

Valo666

#60

du what im duin..instead of duin clear im gettin some this special paint called NightShade by VHT and im paintin em black. so they r completely black during the day n then when u signal they actually light up normaly. Im plannin on duin my side markers, turn signals and tail lights all with it.