Just as title says.
Adam
Adam
Do 6G Celi's use 9006/9005 Headlight Bulbs? - 6G Celicas Forums
http://www.6gc.net/index.php?action=information&itu=8
on the home page under "information"
Low Beam - 9006 (55 watts)
High Beam - 9005 (65 watts)
on the home page under "information"
Low Beam - 9006 (55 watts)
High Beam - 9005 (65 watts)
my st205 swapandour Beams swap
-Batman722+Mar 14, 2005 - 1:55 AM
Guess who feels stupid? I'll give you one guess!!!!
I was asking because I was wondering if everyone here knew about the 9006 to 9005 conversion. AKA, High beams in low beam socket. I did it to my '96 Camry and have loved it since I did it back in Dec with Silverstars.
So much brighter and Whiter! >
>
****Edit If people want, I will type up a quick DIY with pics tomorrow afternoon. Just lemme know
This post has been edited by asg14: Mar 14, 2005 - 2:10 AM
QUOTE(Batman722 @ Mar 14, 2005 - 1:55 AM)
http://www.6gc.net/index.php?action=information&itu=8
on the home page under "information"
Low Beam - 9006 (55 watts)
High Beam - 9005 (65 watts)
[right][snapback]257014[/snapback][/right]
on the home page under "information"
Low Beam - 9006 (55 watts)
High Beam - 9005 (65 watts)
[right][snapback]257014[/snapback][/right]
Guess who feels stupid? I'll give you one guess!!!!
I was asking because I was wondering if everyone here knew about the 9006 to 9005 conversion. AKA, High beams in low beam socket. I did it to my '96 Camry and have loved it since I did it back in Dec with Silverstars.
So much brighter and Whiter! >
>****Edit If people want, I will type up a quick DIY with pics tomorrow afternoon. Just lemme know
This post has been edited by asg14: Mar 14, 2005 - 2:10 AM
So....is that a no to doing it?
hmm...it'd look kinda funny on our cars. Also - the beam is different.
MyFlickrMyeBay_Perpetual Aperture_
-Supersprynt+Mar 14, 2005 - 3:19 PM
You'd be surprised. Mac will actually be doing it. But since the 9005 is in the low beam, yes, it is brighter, but it points down so it does not block oncoming traffic.
QUOTE(Supersprynt @ Mar 14, 2005 - 3:19 PM)
hmm...it'd look kinda funny on our cars. Also - the beam is different.
[right][snapback]257201[/snapback][/right]
[right][snapback]257201[/snapback][/right]
You'd be surprised. Mac will actually be doing it. But since the 9005 is in the low beam, yes, it is brighter, but it points down so it does not block oncoming traffic.
[/quote]
I was asking because I was wondering if everyone here knew about the 9006 to 9005 conversion. AKA, High beams in low beam socket. I did it to my '96 Camry and have loved it since I did it back in Dec with Silverstars.
So much brighter and Whiter! >
>****Edit If people want, I will type up a quick DIY with pics tomorrow afternoon. Just lemme know
[right][snapback]257016[/snapback][/right]
[/quote]
I knew about it from my bimmer fourm. but i have also read a topic here that someone said it was a stupid idear and could burn up your wires. I did it awhile ago. and have had it like that for almost a year. I love it, brighter lights. I do some times get the flash for people thinking my highs are on, but there pointed the same direction as the lows , so there fine.
[quote=Digndoug,Mar 14, 2005 - 3:47 PM]
[right][snapback]257016[/snapback][/right]
[/quote]
I knew about it from my bimmer fourm. but i have also read a topic here that someone said it was a stupid idear and could burn up your wires. I did it awhile ago. and have had it like that for almost a year. I love it, brighter lights. I do some times get the flash for people thinking my highs are on, but there pointed the same direction as the lows , so there fine.
[right][snapback]257216[/snapback][/right]
[/quote]
I have only gotten flashed like 3 times since early Dec. And for burning the wiring harness like some people say, it can't. The wires for the Low's and High's are the same. The only difference is the bulb connector as far as I know. HID's on the other hand can fry them.
[right][snapback]257016[/snapback][/right]
[/quote]
I knew about it from my bimmer fourm. but i have also read a topic here that someone said it was a stupid idear and could burn up your wires. I did it awhile ago. and have had it like that for almost a year. I love it, brighter lights. I do some times get the flash for people thinking my highs are on, but there pointed the same direction as the lows , so there fine.
[right][snapback]257216[/snapback][/right]
[/quote]
I have only gotten flashed like 3 times since early Dec. And for burning the wiring harness like some people say, it can't. The wires for the Low's and High's are the same. The only difference is the bulb connector as far as I know. HID's on the other hand can fry them.
well after weeks of going to the parts store to get the 9006 connetors for my lows... i got tired and just went on ebay ... got a pair of 9005 connectors when they get in i'm going to just replace the 06 ones witht he 05 for the low beams.. and get the brighter bulb.... and if looks bad or funny .. well i'm going to connect them using quick relase connetors on the wires.. so i can switch harnesses if needed ..
[TeamNJCT