Over 1M Posts • 84K Topics • 9K Authors

Request for Toyota Harness Information - 6G Celicas Forums

Topic #20381 14 posts Started by WannabeGT4
I have a couple... but my scanner is crapping all over itself. I found thisone somewhere and saved it...

http://home.earthlink.net/~kwanza26/ToyTCCS_Pins_5S-FE.gif

Better click it rather than post it... to save us poor dial up dudes... =[

"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
Thanks Kwanza. Is that for the 5SFE in the 5th gen celica? cause the number of pins doesn't match the schematic I've got. 6th gen 5sfe has 26,16, and 22 pins on the connectors.

This post has been edited by WannabeGT4: Jan 19, 2005 - 7:43 PM

Project ST204.5 99.88946% complete...
-WannabeGT4+Jan 16, 2005 - 4:51 AM
QUOTE(WannabeGT4 @ Jan 16, 2005 - 4:51 AM)
Thanks Kwanza. Is that for the 5SFE in the 5th gen celica? cause the number of pins doesn't mach the schematic I've got. 6th gen 5sfe has 26,16, and 22 pins on the connectors.
[right][snapback]234242[/snapback][/right]

It might be actually. I got it off of celica.net a while ago. You're looking for the OBDII pinout right?

"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
Actually I'm looking for any information available. So far I have pinouts for:

AE86 4AGE (Scan)
AE92 4AGZE (HTML table from website)
AE101 4AGZE (HTML table from website)
AE111 4AGE (Scan)
AT200 7AFE M/T (Scan)
AT200 7AFE A/T (put together from schematics)
ST205 3SGTE (Scan)
ST185 3SGTE (Scan)
ST165 3SGTE (HTML table from website)
SW20 3rd gen 3SGTE (Scan)
ST204 5SFE A/T (put together from schematics)
AW11 4AGE (Scan)
AW11 4AGZE (Scan)
?????? 5SFE (scan that you posted)

I Still need:
ST215 3SGTE
ST204 5SFE M/T
ST203 3SFE W/ AWS
ST202 3SGE/3SFE W/O AWS
SW20 2nd 3SGTE

This post has been edited by WannabeGT4: Jan 18, 2005 - 7:12 PM

Project ST204.5 99.88946% complete...
Thanks lagos.

Do you have a chart for the main 5sfe fusebox plug "EA1" that the 3SGTE harness needs to be spliced into? I assume it was posted by outsider in your previous post but the link seems to be broken.

Also, could you explain a little more about the 3 or 4 interior plugs that need rewired? Did that just consist of repinning the the 3rd ecu connector (22pin)?

Project ST204.5 99.88946% complete...
hey i need the aw11 4agze pinout and the ae86 4age pinout if you have them can you post them?

-DMC
-thedevilmaycrie+Jan 18, 2005 - 11:13 AM
QUOTE(thedevilmaycrie @ Jan 18, 2005 - 11:13 AM)
hey i need the aw11 4agze pinout and the ae86 4age pinout if you have them can you post them?

-DMC
[right][snapback]235142[/snapback][/right]

Well I'll see what I can do when I get home tonight (5:30ish). I have some generic ones that don't say what they're to but they do specify if they're MAP or AFM so that should help out at least a little bit.

Project ST204.5 99.88946% complete...
-WannabeGT4+Jan 17, 2005 - 12:47 PM
QUOTE(WannabeGT4 @ Jan 17, 2005 - 12:47 PM)
Thanks lagos.

Do you have a chart for the main 5sfe fusebox plug "EA1" that the 3SGTE harness needs to be spliced into? I assume it was posted by outsider in your previous post but the link seems to be broken.

Also, could you explain a little more about the 3 or 4 interior plugs that need rewired? Did that just consist of repinning the the 3rd ecu connector (22pin)?
[right][snapback]234732[/snapback][/right]


?????????????? Any help here buddy???????????

Project ST204.5 99.88946% complete...