trdevelopment

#1

how did you guys take that plastic peace off after you unscrew the 5 nuts....? i tried everything but it wont come off. theres one on each side of the wing....

This post has been edited by trdevelopment: Jan 10, 2005 - 3:51 PM

Consynx

#2

??
did anyone else have a plastic?
i dont remember one...

prpnum1

#3

yeah i did, but i just had to work it with a screwdriver for a little bit. takes a while but you'll get it.

Digndoug

#4

i dont think i had any plastic, i know it only took like 5 min to get the wing off too.

playr158

#5

ok its not plastic its RUBBER thats why its soft.......

go get sum goof off or gunk remover get a cloth and a hair drier
use the hair dryer
to get teh rubber of then the gunk remover to get the residue off

funnyboy117

#6

Since the topic is around, is the wing bolted on or stuck with the rubber stuff you are referring to?

playr158

#7

all wings are bolted

for the 3 post 2 on each side
one in the middle
pull hard after unbolting

then
heat, peel, rub with solvent

trdevelopment

#8

ok cool i just got it off a little while ago thanx a lot guys... the peace i was referring to was this white plastic peace but i got it off thanx... now im plannin on how am i gonna get rid of these nasty holes on the hatch.

Jaws4God

#9

I hope this picture helps: its from my 1995 Celica:

---

~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207

trdevelopment

#10

nice job jaws4god you should go out and buy some metalic silver to paint the screws you filled in where the holes were.

redtcel

#11

-playr158+Jan 11, 2005 - 3:28 AM

QUOTE(playr158 @ Jan 11, 2005 - 3:28 AM)

ok its not plastic its RUBBER thats why its soft.......

go get sum goof off or gunk remover get a cloth and a hair drier
use the hair dryer
to get teh rubber of then the gunk remover to get the residue off
[right][snapback]232249[/snapback][/right]

there are two hard plastic peices that sit in holes, one on each side. i had them when i took my spoiler off. if you dont know what you are talking about then dont start. and to take it off a few posts up had it right... just work it with a screwdriver a little, it will come out with enough elbow grease

Digndoug

#12

-trdevelopment+Jan 11, 2005 - 4:06 AM

QUOTE(trdevelopment @ Jan 11, 2005 - 4:06 AM)

ok cool i just got it off a little while ago thanx a lot guys... the peace i was referring to was this white plastic peace but i got it off thanx... now im plannin on how am i gonna get rid of these nasty holes on the hatch.
[right][snapback]232265[/snapback][/right]

I would say get a lil bondo, and then fill in, sand down nice and smooth, then get some touch up paint.

prpnum1

#13

yeah what he said....dont do screws...i'll take some pics if the rain calms down

Jaws4God

#14

-trdevelopment+Jan 11, 2005 - 5:03 AM

QUOTE(trdevelopment @ Jan 11, 2005 - 5:03 AM)

nice job jaws4god you should go out and buy some metalic silver to paint the screws you filled in where the holes were.
[right][snapback]232302[/snapback][/right]

Thank You for the comments >> I actually had removed my aluminum wing because it was denting my trunk. I took it to a shop where they reformed the trunk and fixed the holes. I then added a Shogun Z style wing where the stock wing was.

---

~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207

playr158

#15

thats HUUUUUGE

Hanyo

#16

dont you need a backing or something if you want to fill the holes with bondo.. I would think that if you clam your trunk the bondo would start to crack.

racergirl

#17

that is really big

trdevelopment

#18

-redtcel+Jan 11, 2005 - 5:21 AM

QUOTE(redtcel @ Jan 11, 2005 - 5:21 AM)

-playr158+Jan 11, 2005 - 3:28 AM

QUOTE(playr158 @ Jan 11, 2005 - 3:28 AM)

ok its not plastic its RUBBER thats why its soft.......

go get sum goof off or gunk remover get a cloth and a hair drier
use the hair dryer
to get teh rubber of then the gunk remover to get the residue off
[right][snapback]232249[/snapback][/right]

there are two hard plastic peices that sit in holes, one on each side. i had them when i took my spoiler off. if you dont know what you are talking about then dont start. and to take it off a few posts up had it right... just work it with a screwdriver a little, it will come out with enough elbow grease
[right][snapback]232312[/snapback][/right]

ok thanx a lot guys im workin on filling the holes

This post has been edited by trdevelopment: Jan 14, 2005 - 1:09 AM

Jaws4God

#19

-racergirl+Jan 14, 2005 - 5:56 AM

QUOTE(racergirl @ Jan 14, 2005 - 5:56 AM)

that is really big
[right][snapback]233608[/snapback][/right]

I wanted a tall one so that i could see under it in my rear view mirror. The stock one got on my nerves because it looked like a car was behind me whenever i looked.

---

~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207