trdevelopment

#1

hey guys i got a set of ground controll coilovers from a guy on this site and i dont know witch one are the front and witch ones are the back...? two of them have a top hat that sticks out and the other two are regular.

CelicaQT

#2

Here's what the fronts look like


Here's the rears

CelicaQT

#3

I hope you know which springs are the fronts and which are the rears.

The previous ownder might have gotten a different spring rate for the fronts and rears?

trdevelopment

#4

thanx a lot qt but how do you tell the spring rate?

CelicaQT

#5

I really can't recall. Mine have been off for about 1 yr already. You should ask the person who you bought them from. He/she might be able to direct you to which one is which.

I know there were some #'s written on the spring itself, and that distinguished which was what. But off bat I can't really help you with that. Plus I think the fronts and rears were the same height? I think maybe the skinnier ones are the rears?
But don't quote me on that.

Junior

#6

The springs will be the same diameter, but it is important to make sure the ones with the stiffer spring rate go on the front. Take the numbers off the springs and call ground control. They are very helpful and don't mind answering questions.

trdevelopment

#7

ok guys i have two springs that say 44/99 64.66 and the other two springs are 41/99 64.53... do any of you guys have the number to ground controll?

BLINKYxMUNKEY

#8

i think 64.66 are the fronts, and 64.53 are the rears. thats what my box says.

This post has been edited by BLINKYxMUNKEY: Nov 23, 2004 - 11:03 PM

---

FlickR2011 Subaru WRX and 1997 3sgte Celica

trdevelopment

#9

ok cool cool thanx a lot man.

Punch

#10

myground control's are still in the box. Here you go! the numbers are on the springs; front-6c.180.64.61 rear-6c.180.64.44
hope that helps!!!

trdevelopment

#11

hey guys another question i test drove my car today and it was makin some sounds i zip tied the top hats and greased them very good. but i didnt grease the bottom where the springs sits on the part you adjust with the allen key... do i grease that also? its in gold if you look at celicaqts picture if you guys dont know what im talking about.

This post has been edited by trdevelopment: Nov 25, 2004 - 3:00 AM

Mynzeyes

#12

-trdevelopment+Nov 25, 2004 - 1:59 AM

QUOTE(trdevelopment @ Nov 25, 2004 - 1:59 AM)

hey guys another question i test drove my car today and it was makin some sounds i zip tied the top hats and greased them very good. but i didnt grease the bottom where the springs sits on the part you adjust with the allen key... do i grease that also? its in gold if you look at celicaqts picture if you guys dont know what im talking about.
[right][snapback]211830[/snapback][/right]

i greased the top and mine didn't make any noises afterwards...i need to regrease them...

---

AIM==Mynzeyes