ok guys heres my prob. i installed a Greddy Prefec B into my car today.... As soon as i react .2 bar the engine cuts off till i let off the gas .... any suggestions????
-DMC
-DMC
Boost Problems - 6G Celicas Forums
sounds like you are hitting fuel cut.
did you disconnect and plug the Tvis? you can not correctly control the boost with that line still hooked up. im not sure what .2 bar is in psi. but stock fuel cut should be around 12-16psi depending on what year your motor is.
did you disconnect and plug the Tvis? you can not correctly control the boost with that line still hooked up. im not sure what .2 bar is in psi. but stock fuel cut should be around 12-16psi depending on what year your motor is.
15PSI - 30MPG - Megasquirt Tuned
.2 bar is equivalent to about 3psi
it's roughly 15psi for every bar
it's roughly 15psi for every bar
CEL coming on?
MyFlickrMyeBay_Perpetual Aperture_
yeah pull the CEL codes and see what they tell u.
15PSI - 30MPG - Megasquirt Tuned
problem solved thanx supersprynt
so, what was it?
15PSI - 30MPG - Megasquirt Tuned
im curious too!