Hey fellas,

I just ordered my SS-III splitters from Chris, and I was wanting to know what you guys thought the best looking side skirts to buy would be. And where I could get them. I don't want to spend a whole lot of money, since I still need to paint these. The best ones that I can think of are the stock ones, or z-glide from CBB. Whatcha think?

You can get the stock sides for a whole lot less money than the z-glide ones. I'd say if money is more of an issue, go with stock sides. You can find them at the junk yard, in the Buying Selling Forums, and maybe at TAPrecycling.com

yea oem would look good, it looks good on doge's car and he has those extension and stock side skirts

-LatinKraze+Aug 3, 2004 - 3:35 PM

ive seen them sell in the forums for like $100 - $150 for the pair...

the part numbers for the stock side skirts are in the sticky post at the top,some dealers say they cant get them, some can.
I have a 94 celica so I'm sorta screwed when it comes to oem side skirts
here an email I just got from Toyotapartsworld.com
I too just orded Chrisc's front and rear bumper extentions.
I may go with the 404 sides from the erebuni kit or a good body shop could fit the toyota oem skirts on for me.
____________________________________________________________________



Thanks for visiting our website!!! I looked at the major sheet
metal
components for the 94 and a 96 Celica. All the parts were the same,
but.....
here is the problem. The sheet metal comes with the installation holes
already in them. There aren't any directions for installing them, or a
template to help locate the holes you need to drill. So, my opinion is
this.... I believe it will fit, but I think the installation is going
to be
difficult.

Thanks again,
Greg Whiting
mailto: toyota@toyotapartsworld.com
<mailto:toyota@toyotapartsworld.com>
(978)374-6975 Local
(800)323-6805 USA

-----Original Message-----
From: admin@toyotapartsworld.com [mailto:admin@toyotapartsworld.com]
Sent: Monday, August 02, 2004 12:04 PM
To: Toyota@toyotapartsworld.com
Subject: Data posted to form 1 of
http://www.toyotapartsworld.com/toyinquiry.htm

stock sides will fit a 94.. and you don't need to drill those holes all along the side, aftermarket sides don't have them.

and Mike, go with the stock sides. the height is a perfect match for the SS-III splitters >>

OOOOOOORRRR you can look for the jdm sides like that ones i got off ebay....mwahahahaha

yea i'd say the stock sides..they always look good with the splitters.. >>

Wow thanks for all the replys. I'm so pumped to be getting these splitters, it's not funny. gh0st_d0g, thanks for letting me know that they're a perfect match. Too bad my ST didn't come with stock sides. You would think that a limited edition would...bahaha!