📝 Marsstar505's Posts
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
I replaced the coolant temp sensor as it was cheap. And I readjusted the tps sensor and it still do was the same thing. If I plug in my iac it closes the iac and almost stalls out, and unplugged it id...
Topic ID: 94016 • Post ID: 9957905
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
Can anyone confirm that the pin voltage chart is right and that pins 9 and 10 on the 22pin connecter has battery voltage with the key on engine off in a car with a good idle?
Topic ID: 94016 • Post ID: 9957903
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
I retarded the timing back to 12 degrees and now it is very smooth on power it got rid of the surges and it doesn't hold back randomly now. But I still have very random fuel cut at 4k and the idle isn...
Topic ID: 94016 • Post ID: 9957902
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
There is a small spot on the ecu but it doesn't look like it burned through the wires. It connects the main chip with a sub chip. And I can try adjusting the time back the factory is 10 I set it at 14...
Topic ID: 94016 • Post ID: 9957900
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
I rebuilt the motor 10k miles ago and at that time I replaced all hoses including coolant and vacuum. That is also when I changed the timing belt my self. I had the oil pump seal start leaking and I h...
Topic ID: 94016 • Post ID: 9957897
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
The timing belt only has 10k miles on it. It feels like when you get fuel cut for max rpm. It only cuts once then let's me rev more but it is ruff for the rest of the rpm range. I'm sure the timing be...
Topic ID: 94016 • Post ID: 9957894
5sfe computer bad??? - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› Engine/Transmission/Maintenance
I have a 94gt and I have replaced the iac valve 3 times with new ones oem and it still won't idle right. At first when I swapped it it was perfect 750 rpm idle then after about a month it started to f...
Topic ID: 94016 • Post ID: 9957892
Noise level/Sound deadening - 6G Celicas Forums
EnthusiastJoined Oct 27, '14From Rio rancho, nmCurrentlyOfflineReputation:1(100%)
6th Generation Celica
› General Discussion
I just tested mine and at idle I sit at 54db and reving the engine up I go up to 69db. I have removed all the interior off the floor boards and sprayed lizard skin on it.
this is my second celica that...
this is my second celica that...
Topic ID: 94008 • Post ID: 9957838
Showing page 3 of 3 (48 total posts)