Engine/Transmission/Maintenance
14,249
Total Topics
25
Showing
5
Page 5 of 570
Topics in Engine/Transmission/Maintenance •
newest topics first
Mishimoto has a couple styles and there are a bunch available at places like summitracing and jegs.
As long as the plate has a 1/8NPT hole, it can be ...
Check to make sure the radiator and condenser fins aren't crushed or blocked off. Outside of that make sure coolant levels are proper and that the ra...
Here are some pictures of the rear hub & bearing assembly with the ABS ring. Like I said, the ABS ring is hammered onto the inside of the spindle, and...
Good reference video for changing the timing belt/seals for a 3sgte.
https://www.youtube.com/watch?v=WFRq00HZCAE&t=2168s...
Based on his profile he has a ST with 7A-FE, I can't remember exactly on mine but I don't think they were exactly quite either. Oil weight has a lot ...
Hello All. This is my first post so please forgive me if this question has been asked elsewhere. I searched and didn't see anything that answered my q...
I just dealt with this on a Camry, the hose was two different sizes at the ends. I was able to cobble together a solution but I had to use a few parts...
Basically which exhausts sound the least raspy? The flex pipe on my stock exhaust broke causing a small exhaust leak, and I honestly like how it sound...
DriftMotion repairs 1JZ and 2JZ ECUs all the time. While they dont specialize in 7A ECUs, its the same principal so Im sure they can repair yours...
Anyone done this before, I need help, been a few days, been in traffic and on freeway. Last step before getting smog.
99 5sfe mt...
On the left side of my engine block facing from the outside on the intake manifold, there is a solenoid mounted there. I searched for it on Google and...
Does anyone know if the radiator hoses for a gt4 are the same as the beams? Reason for asking is i found a decent looking set of aftermarket hoses for...
Are you losing coolant? Steam from exhaust? Are you capable of doing the work yourself? If so, take the water pump off and check it, the fan, or fins,...
Can you feel the clutch stick when coming out of first? I drove a truck with a slipping clutch once, was not fun....
a picture might help...
Can anyone point me to a manifold/cat combo? I recently got my exhaust done with the rear car removed. I dont want to put an open header on in fears ...
As far as the bodies they the same up front so that turns into your basic bodywork collision repair as for the swap i haven't done that but it should ...
blah blah
This post has been edited by
BonzaiCelica
: Apr 3, 2019 - 3:17 PM...
The best way for me to hear this sound is when I pull into my driveway which has a wall on one side and the sound resonates. The best way I can descri...
I'm planning change the head gasket & studs on next holiday, want take this chance also to press some arp conrod bolts / check condition of bearings.
...
Do you have the factory service manual. There is all kinds of diagrams with notes on the differences. I could take some pictures of them for you if th...
Have you checked oil pressure with an actual pressure gauge yet? Sounds like oil isn't making it to the top of the motor....
Hey guys,
I am not able to find an answer to the following question: what is the vacuum routing schematics on California emissions 96+ 2.2l 5SFE vehic...
^That. Drop the cats and check them out. If they're just clogged with carbon and aren't melted or broken you can clean them out and put them back on...
Alright, set catalyst monitor today, went to smog, PASSED !! Thanks to everyone for helping out, glad this is behind me!...