http://www.aempower.com/ViewCategory.aspx?CategoryID=116

I'm thinking this is a better option to the emanage blue. pls help

Thanks

This post has been edited by FunkySR: Sep 14, 2008 - 3:56 PM

Yeah it sure will, I haven't gotten to use one yet but they look really nice! Plus it's AEM so the instructions will be in english, AND there will be english tech support!

-Doc

A lot of cars in MN uses them going from NA to Turbo.

Wow, no BS additional (MANDATORY and NECESSARY) accesories to buy like with the e-Manage? I would like to give this thing a try.

i think the only thing i have to buy would be a resistor pack for my injectors.

That's a point, what spec exactly are the Supra Lime Green's/ I know they are 315CC.

i'm putting myu emanage blue with all the accessories on ebay now. lol

>
LINK!

>
the supra 315's are high impedance,
~12-15ohms

>


in the for sale section for now

ive heard from pure tunning in toledo that they are way better then anything if u have a n/a goin to boosted...only thing is u have to custom wire it to ur ECU..

what kind of ignition does the 7AFE have. Hall or Mag. Fitting this today.

Thanks,.

hey all.

ok AEM FIC fitted today. Wired everything up OK, but i have a feeling there is a problem with my MAP sensor. Here are the problems i'm facing at the minute. I'm still running the SAFC 2, but on the datafile 2 with all values set to 0.

1. CEL - Code 31. MAP sensor. Only on when FIC connected. I suspect connected wrong way round. If bypassed, there is no CEL.

2. With FIC bypassed, SAFC back to old map settings and driving along, it just cuts out after a few minutes. WTF??

3. I connected my crank position sensor as MAG (magnetic type) using pins G1 and G- (E5-5 and E5-18).

4. The 7AFE injectors seem to be batch ie signals to injectors 1 and 3 and same for 2 and 4. So I joined 1 and 3, and 2 and 4 on the AEM harness. That seemed to work.

5. I did not notice a camshaft position sensor. I went through the ECU pin oit like 50 times.

Where have i gone wrong and why is the car cutting out with no CEL.

Help please.

PS here are links to the pinoits..

http://www.emanageforums.com/forums/attach...mp;d=1206491637

http://www.emanageforums.com/forums/attach...mp;d=1206491691

I also cross referenced with this
http://evilspeed.com/SAFC.htm

Cheers

J

apparently this only works with OBD II cars, what year is your celica ?

i got one for my 5S-FTE project and im getting a www.boomslang.us harness made for it. talking to the guy at boomslang, im also going to add these to my 7th gen celica turbo kits.

how much is the boom slang harness...

btw it should work with my car.